Optimate 7 Select battery charger from Tecmate TM250V3

The world's most advanced 10A battery charger for starter and deep cycle batteries!

OptiMate 7 Select is perfect for 12 V starter and deep cycle batteries that require precise temperature-controlled charging and long, unattended maintenance. When selecting the voltage (14.4 V / 14.7 V), a safety check is performed to ensure that the battery is charged at the correct voltage.

Please note: we supply the Optimate 7 with "own warranty" and that is to say: within 2 years defect, immediately a new one (so no repair conditions).

• Battery charger, trickle charger and battery conditioner for your car, caravan or boat
• Trickle charger / conditioner for 12 Volt battery from 15 to 240 Ah (AGM, MF and GEL)
• Fast delivery from stock
• 2 year manufacturer's warranty
• Supplied with TM-71 (cord set with fuse for attachment to battery) and TM-74 (cord set with alligator clips).
• The housing is made of weather resistant plastic (moisture resistant).
• At the top and bottom, the housing is provided with hanging holes (additional bracket is not required).
• Visible what the loading capacity is
• Visible what the quality / status of the battery is
• Even more efficient, and even lighter
• No more undercharging or overcharging the battery
• Maintenance program gives the battery only what it needs

Keep your motorcycle battery in good condition with the Optimate 7, even if it is not used for a long time (eg in winter). It is both a battery charger and a battery conditioner. This means that this "charger" can be continuously connected to the battery for a longer period of time. This ensures that the battery remains in good (read: charged) condition

The world's most advanced 10A battery charger for starter and deep cycle batteries!

OptiMate 7 Select is perfect for 12 V starter and deep cycle batteries that require precise temperature-controlled charging and long, unattended maintenance. When selecting the voltage (14.4 V / 14.7 V), a safety check is performed to ensure that the battery is charged at the correct voltage.

Special feature: POWER SUPPLY provides stable power for vehicle system reprogramming, showroom model demonstration or retention of stored settings when disconnecting battery cables to connect powered accessories or to replace battery

• CHARGING CURRENT : 10A (Ampmatic) @ 14.4V / 14.7V / 8A @ 13.6V

• USE : Indoor / Outdoor (lowest temperature: -40 ° F / -40 ° C).

• RESTORE: Low voltage start of 0.5V + 2 phase desulphation recovery .

• IDEAL FOR: STD, AGM, GEL & Deep Cycle 12V batteries from 3 - 400Ah.

• INPUT CURRENT : Universal (100-240V 50-60Hz), high efficiency (CEC approved), fully sealed.

• VERSION: Weatherproof housing with wall mounts, 6 ft / 180 cm AC power cable and 6 ft / 180 cm charging cable with SAE connector at the end. Weatherproof battery cable and standard battery terminal set including.

SAFE : No risk of overcharging. Completely safe for vehicle electronics. Sparks are suppressed. Safe battery maintenance for the long term. Automatic shutdown in the event of a short circuit or when the battery is disconnected. 3 year limited replacement warranty.

.